Автор Тема: EbNaut  (Прочитано 43285 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн EW6X

  • Ветеран
  • *****
  • Сообщений: 1086
    • Просмотр профиля
EbNaut
« : 18 Ноябрь 2015, 23:45:55 »
С сайта http://abelian.org/
« Последнее редактирование: 26 Ноябрь 2015, 09:21:08 от EW6BN »
(ex EW6BN)

Оффлайн EW6X

  • Ветеран
  • *****
  • Сообщений: 1086
    • Просмотр профиля
Re: EbNaut
« Ответ #1 : 19 Ноябрь 2015, 08:52:55 »
До кучи утилита от Маркуса, описание (En) внутри.
(ex EW6BN)

Оффлайн rk2y

  • Ветеран
  • *****
  • Сообщений: 630
    • Просмотр профиля
    • E-mail
Re: EbNaut
« Ответ #2 : 20 Ноябрь 2015, 15:41:50 »
Какие требования к железу?

Оффлайн EW6X

  • Ветеран
  • *****
  • Сообщений: 1086
    • Просмотр профиля
Re: EbNaut
« Ответ #3 : 20 Ноябрь 2015, 19:51:54 »
Какие требования к железу?
Да такие же как и к СПЛ, для приёма, а вот при декодировании на медленных компах будет долго.
(ex EW6BN)

Оффлайн rw3adb

  • Ветеран
  • *****
  • Сообщений: 6338
    • Просмотр профиля
    • E-mail
Re: EbNaut
« Ответ #4 : 21 Ноябрь 2015, 08:23:42 »
беседа по части сей новой моды в теме "сегодня в эфире"

иначе, потеряется там, бетон.

и лучше, что её касается и дискуссии - перенесите сюда.
--_ _ _  _ _ _ --  --_   _   _-_  _--  _ _ _-- _- -_ _ -_ _ _

Оффлайн ra3yo

  • Постоялец
  • ***
  • Сообщений: 214
    • Просмотр профиля
Re: EbNaut
« Ответ #5 : 21 Ноябрь 2015, 11:05:49 »
Mode                 Needed SNR in 2500 Hz   Net data speed in bits/s      Needed Eb/N0

SSB voice                  +10 dB                   20*                      +31 dB     
CW (ZRO-test, by ear)      -18 dB                    0.54                    +16 dB**
CW (QRSS-3, waterfall)     -26 dB                    0.13                    +14 dB**
CW (RSCW, 12 wpm)         -12 dB                    4                       +13 dB**
OPERA-2                            -23 dB                    0.23                    +14 dB***
RTTY                                  -5 dB                    32                       +14 dB
PSK31                               -10 dB                   31                        +9 dB
WSPR                                -29 dB                    0.45                     +5 dB****
WSPR-15                           -38 dB                    0.056                    +5 dB****
JT65 (for EME)                   -24 dB                    1.54                     +5 dB****
Coherent BPSK on VLF      -57 dB                     0.0058                   -1 dB

почти 30 дб ::) выигрыша перед wcpr-15
Но и скорость передачи в 10 раз ниже

Оффлайн rw3adb

  • Ветеран
  • *****
  • Сообщений: 6338
    • Просмотр профиля
    • E-mail
Re: EbNaut
« Ответ #6 : 22 Ноябрь 2015, 04:45:44 »
Но и скорость передачи в 10 раз ниже

а если загнать в щрсс-120)))
--_ _ _  _ _ _ --  --_   _   _-_  _--  _ _ _-- _- -_ _ -_ _ _

Оффлайн rn3aus

  • Ветеран
  • *****
  • Сообщений: 3547
    • Просмотр профиля
Re: EbNaut
« Ответ #7 : 12 Октябрь 2016, 18:30:48 »
В новом сезоне вновь некоторая активность в EbNaut. В рассылке возникла тема по "руководству для чайников" как работать в EbNaut.
Есть описание как настроить Спектрумлаб для этого: http://www.qsl.net/dl4yhf/speclab/EbNaut_Rcvr.htm

Оффлайн r2bas

  • Ветеран
  • *****
  • Сообщений: 2737
  • ex rn3agc
    • Просмотр профиля
Re: EbNaut
« Ответ #8 : 12 Октябрь 2016, 18:33:43 »
В новом сезоне вновь некоторая активность в EbNaut. В рассылке возникла тема по "руководству для чайников" как работать в EbNaut.
Есть описание как настроить Спектрумлаб для этого: http://www.qsl.net/dl4yhf/speclab/EbNaut_Rcvr.htm


Самостоятельная программа существует? Чтобы без Спецлабов.

Оффлайн rn3aus

  • Ветеран
  • *****
  • Сообщений: 3547
    • Просмотр профиля
Re: EbNaut
« Ответ #9 : 12 Октябрь 2016, 18:49:28 »
В новом сезоне вновь некоторая активность в EbNaut. В рассылке возникла тема по "руководству для чайников" как работать в EbNaut.
Есть описание как настроить Спектрумлаб для этого: http://www.qsl.net/dl4yhf/speclab/EbNaut_Rcvr.htm


Самостоятельная программа существует? Чтобы без Спецлабов.
Я так понимаю есть вот здесь: http://abelian.org/ebnaut/software_ms.shtml

Оффлайн EW6X

  • Ветеран
  • *****
  • Сообщений: 1086
    • Просмотр профиля
Re: EbNaut
« Ответ #10 : 13 Октябрь 2016, 08:35:26 »
В новом сезоне вновь некоторая активность в EbNaut.
Она была периодически постоянной, сейчас новый виток.
Я тогда пробовал прикрутить всё это, но что-то всё муторно оказалось, так толком и не добился.
Нужен софт "всё в одном флаконе", тогда и народ подтянется, а так только танцы с файлами и СПЛ, хотя может что-то сдвинулось за год, пока что-то нет желания поковыряться опять...
(ex EW6BN)

Оффлайн rn3aus

  • Ветеран
  • *****
  • Сообщений: 3547
    • Просмотр профиля
Re: EbNaut
« Ответ #11 : 16 Октябрь 2016, 16:07:29 »
Сохраним здесь материалы из рассылки: советы для "чайников" от DK7FC:
Цитировать
Hi all,

There must be some progress.
I thought it could be useful to lern how to participate in EbNaut detections by doing 2 exercises.
1: Generating wav files that contain the message
2: Configure the EbNaut decoder to read the wav file successfully.

Step 2 can be done today.
First you need to download the decoder software at http://abelian.org/ebnaut/
Then you need a wav-file containing a message. For this tutorial, you can have a wav file that was generated on my PC. It contains even 2 messages (rare!).
Download the file from: https://dl.dropboxusercontent.com/u/19882028/LF/10111913.wav
To decode a EbNaut message you have to know the start time, the symbol length, the number of characters and the Coding. These informations are given by the TX stn.
Info for message 1:
> Am 11.10.2016 19:04, schrieb IZ7SLZ:
>> Hello LF,
>> Riccardo IW4DXW informs that he also will be QRV EbNaut tonight on 137485.0006 Hz
>> Message contains 31 characters transmitted at 0.5 s/sym, coding 8K19A, duration 14'40'' each hour starting 19.00Z  till 23.00Z .
>>
>> GL.
>> 73, Domenico iz7slz

My file contains the 19:00 UTC transmission.
Info for message 2:

>>>> Hello Group,
>>>>
>>>> considering the Stefan's request, i'm pleased to test again EbNaut today on LF with a 51 characters message, 8K19A code, 0.5 s/symbol, duration 22' 40''.
>>>> QRG = 137495.000 Hz
>>>>
>>>> Scheduled UT: at hour, starting from 19.00 'till 01.00 of 12-10-2016 (included). Carrier will be "on"  5 minutes before the transmissions.

Now use the EbNaut decoder and select the wav file. For the first message you can choose 31 characters, and 0.5 for the symbol period. Then press start, just for a few seconds, then stop again. You will now see some more informations: The RX freqency and the file start time. Now you can select the frequency offset, which is -15 Hz. Type that into the field.
The next thing is the timing offset. The start time is 18:54:22.340 and the message started 19:00:00. You need to know the timing offset precisely! If you don't get a decode, it is worth to vary the time offset a bit. A timing offset could of course also come from the TX stn, sometimes unknown. SpecLab causes a time offset of 4 samples. You can also see the samplerate 117.19/sec. So the timing offset is: (4S)/(117.19S/sec)+0.66sec+37sec+300sec = 337.69 seconds. Type that into the start offset field.
Now you can start the decoder and should get a decode quite quickly, depending on your PC power.

By changing just the number of characters and the frequency offset, you should receive the other message.

Fine, that was part 1 :-)
I need to get a feedback now if YOU got a successful decode or if there are problems. Depending on that feedback i would then continue with part 2.
Can someone of the 'newcomers' decode both messages?

73, Stefan


Файл wav с примером можно скачать и отсюда:
http://rn3aus.narod.ru/10111913.wav

Оффлайн rn3aus

  • Ветеран
  • *****
  • Сообщений: 3547
    • Просмотр профиля
Re: EbNaut
« Ответ #12 : 16 Октябрь 2016, 16:19:56 »
Если все сделали правильно, получите два декода. Первый при сдвиге частоты -15 Гц и длиной сообщения 31, второй при -5 Гц и длиной сообщения 51.
« Последнее редактирование: 16 Октябрь 2016, 16:22:03 от rn3aus »

Оффлайн rw3adb

  • Ветеран
  • *****
  • Сообщений: 6338
    • Просмотр профиля
    • E-mail
Re: EbNaut
« Ответ #13 : 25 Октябрь 2016, 20:43:49 »
Стефан в рсгб вещал про настройки для ебнаута, да выклал юср для спл.

на всякий случай, пусть будет тут. может у кого дойдут руки из числа тех у кого приличный приём.

LF: Idiot's guide to receiving Ebnaut? - Tutorial part2

OK so if your RX and PC time is stable, we can give it a try.
-You need a stereo input soundcard and feed the PPS signal to the right channel. Just run it at 48 kS/s. The PPS signal must be DC decoupled and the level must be limited to 80% of the ADC range, simply use 100nF and a resistive divider. The values will depend on your GPS module and its output level.
-Download the latest version of SpecLab and install it to the recommended folder.
-Turn the RX to 136.00000 kHz USB and use a 2.5 kHz wide SSB filter. Connect the RX to the left channel of the soundcard input.
-Download the usr file in this mail and open it into SpecLab (File -> Load settings from...)
-Click on Components -> Show Components. A box opens. In the top left corner, click on "SR cal". Another box opens. The Status must be green, showing pps peaks OK. If the level is to high, click on "scope" and see the peak form. Then you need to adjust the divider of your GPS module to reduce or increase the PPS level. The box must be green for most of the time in the end. Click to scope again, there is a pulse counter PC and an error counter EC. The error should be lower than 2 % or so, for example PC=1000 EC=16. Just let it run a few hours and see if the tracking is stable.
If you have problems in this step, tell us what the problem is.
-Wait a few hours and check if text files appear at C:\Spectrum\data After the first 40 minutes, a file should appear each 10 minutes.
-Ask someone to transmit a short EbNaut message at 1s symbols and make sure to record on this time.

So far. Then we can continue with part 3 :-)

73, Stefan
--_ _ _  _ _ _ --  --_   _   _-_  _--  _ _ _-- _- -_ _ -_ _ _

Оффлайн rw3adb

  • Ветеран
  • *****
  • Сообщений: 6338
    • Просмотр профиля
    • E-mail
Re: EbNaut
« Ответ #14 : 30 Ноябрь 2016, 19:24:13 »
посколь никто не почесался занести, извольте:

An update to the decoder, V0.6 fixes this. No other
significant changes.

  http://abelian.org/ebnaut/software_ms.shtml

If a decoded message is too long for the width of the
output window, it will wrap onto the next lines at
word boundaries. But only if the message contains
some spaces (I guess long messages usually do). If there
are no spaces, it will be clipped at about 48 chars but
the log file will show the full message.

--
Paul Nicholson
--
--_ _ _  _ _ _ --  --_   _   _-_  _--  _ _ _-- _- -_ _ -_ _ _